Ultra Tough Varnish
Wood that is used a lot will need protecting. Our Ultra Tough Varnish protects against knocks scuffs and scratches as well as household chemicals, water and heat - perfect for high wear areas. It's a traditional polyurethane varnish that gives you a mellow finish - highlighting the natural appearance of wood. You can only get it in clear, but that's all you need if you want a tough finish for surfaces such as doors, window frames and joinery.
- Long lasting protection
- Rich, clear, mellow finish
- Brings out the beauty of your wood
- Tough, durable finish
Ronseal Ultra Tough Varnish
Our Ultra Tough Varnish provides long lasting protection from knocks and scratches and can resist most household spills. It's ultra hard finish helps to deliver a rich, clear, mellow finish that enhances the beauty of the wood.
Before You Start
Make sure you're in a warm, well ventilated room. Open a door or a window if you need to.
Preparation: Ensure that all surfaces are free from oil, grease and wax by wiping down with white spirit. Remove any loose, flaking or peeling coatings. Give the wood a good sand down, making sure you're wearing a face mask. Then
Using Your Varnish
Give the tin a good stir before you use it. Use a brush and apply in the direction of the grain. Apply 2-3 coats, leaving 6 hours between each coat. Before the final coat give it a quick sand and wipe with a damp cloth.
Usage Areas: All interior wood.
Compatibility: Bare and previously varnished wood. Not suitable for painted wood.
Clean Up: Clean all brushed in white spirit or brush cleaner.